Dust-Free Clean Booth

Snyli Environmental Technology (Shandong) Co., Ltd. is one of the most reliable manufacturers and suppliers of dust-free clean booth in China. With abundant experience, we warmly welcome you to wholesale advanced dust-free clean booth from our factory. For price consultation, contact us.

 

Dust-Free Clean Booth workstation is the quickest and easiest way to set up a simple cleanroom, with a wide range of cleanliness levels and spaces that can be designed and made according to the needs of the user, making it easy to use, flexible, easy to install and short to construct, as well as being mobile.

It is also designed to reduce costs in areas where high cleanliness is required in general class cleanrooms.

The ultra-large dust free clean booth workstation is specially designed for the rapid construction of simple cleanrooms with high cleanliness. It has many advantages such as short construction period, low cost, simple maintenance, reusable, changeable cleanliness by increasing or decreasing the number of FFUs, etc. They are increasingly used in various large electronic factories, food packaging and other industries.

Area(㎡)	10	20	30	40	50	60	70	80	90	100	300	500	1000	2000	3000	4000
Clean grade FS209E	FFU Qty (Pcs)
Class 100	12	24	36	48	60	72	84	96	108	120	360	600	1200	2400	3600	4800
Class 1000	4	8	12	16	20	24	28	32	36	40	120	200	400	800	1200	1600
Class 10000	2	4	6	8	10	12	14	16	18	20	60	100	200	400	600	800

 

First, control the sources of pollution and reduce pollution.

Clean sheds try to use processes and equipment that produce as few pollutants as possible, to prevent pollutants produced during production from spreading to the surrounding area, and to reduce pollutants brought indoors by people and materials.

Secondly, Prevents contamination from outside the clean booth from entering the room

The main way to control contamination in clean rooms should consider the approach of air purification and indoor pressure control. According to the different cleanliness requirements of the room, different treatments and different amounts of clean air are sent out in different ways, while the room is discharged to produce The air in the room is kept at the required level of cleanliness by discharging the dirty air generated in the room.

The clean treatment of the incoming air is therefore a key aspect, which is why the number of air changes in a clean room is greater than in a normal air-conditioned room. The smaller the cleanliness, the greater the air changes.

 

Thirdly, clean up any contamination in the clean shed that has already occurred.

This is also the key to reflecting the function of the clean room booth. Reasonable airflow organisation, i.e. through the location of air supply and return air, the size and form are carefully designed so that the indoor air flows in the appropriate direction to avoid dead ends and secondary pollution. Different The organisation of airflow directly affects the difficulty of construction and the cost of the project.

Fourth, flow rate control

The airflow velocity in the clean room should be high so as not to be disturbed by other factors (e.g. heat flow), but not too high. Flow rate Too high and dust flies around the room, causing pollution.

Electronics factory: the workshop of the electronics factory is generally of low purification level outside, the interior will need high-level clean areas, such as: assembly line work area, inspection table, special equipment work release dust particles or special gas area, suitable for the construction of local small area area, the process control in the clean area, in order to improve the product good rate, especially some photoelectric industry production equipment, the production process will The fan filtration system on top of the clean work shed can improve the internal air quality and provide a safe and comfortable production environment.

Food factory: In the food production process, the packaging process is generally recommended to use a class 100 clean room, the higher the level, the higher the safety compliance rate of the food produced.

Laboratory: laboratory research units outside the general office, some laboratory research content needs to have a certain temperature and humidity, illumination, cleanliness requirements, experimental work is controlled in the purified Dust-Free Clean Booth work shed area to improve the success rate of scientific research projects.

Can design and customize products with small batch orders according to the customer's drawings.

Propose the best solution according to the customer's product, and adopt the best production plan to reduce costs.

We have many years of production experience, if there is a conflict between product design and actual production, we can propose the best. modification to meet the actual use of the product.

First-class product quality and perfect after-sales service.

Factory Outlet.

FedEx/DHL/UPS/TNT for samples, Door-to-Door;

By Air or by Sea for batch goods; Airport/ Port receiving;

Customers specifying freight forwarders or negotiable shipping methods;

Delivery Time: 1-3 days for samples; Generally 7-10 days for batch goods,also depends on the specific quanlity.

Hot Tags: dust-free clean booth, China, suppliers, manufacturers, factory, wholesale, price, air filter for livestock farming, air filter for agriculture, air filter for motorcycles, air filter for nitrogen production plants, air filter for dust control, air filter for carbon dioxide capture plants