Laminar Flow Clean Booth

Snyli Environmental Technology (Shandong) Co., Ltd. is one of the most reliable manufacturers and suppliers of laminar flow clean booth in China. With abundant experience, we warmly welcome you to wholesale advanced laminar flow clean booth from our factory. For price consultation, contact us.

Laminar flow clean booth is mainly composed of box, fan, primary air filter, damping layer, lamps and so on, and the shell is sprayed with plastic. The product can be both suspended and ground supported, with compact structure and easy to use.

Especially suitable for the workshop of the local high requirements for cleanliness of the area, such as assembly area of high precision products in the assembly line work area. It is especially suitable for localized areas with high cleanliness requirements, such as assembly areas of high-precision products in assembly lines.

Application areas of the clean booth

1. Electronics factory: Electronic plant workshop outside the general purification level is low, the internal will need high-level clean area, such as: assembly line work area, inspection table, special equipment work release dust particles or special gas area, suitable for building local small area area, the core process control in the clean area, in order to improve the product good rate, especially some photoelectric industry production equipment, the production process will release odor gas, clean work shed top fan filtration system can enhance the internal air quality, to provide a safe and comfortable production environment.

2. Food factory: In the food production process, the packaging process is generally recommended to use a hundred levels of clean room, the higher the level, the production of food in terms of safety standards, the higher the rate of compliance.

3. Laboratory: Laboratory research units outside the ordinary office, some laboratory research content needs to have a certain temperature and humidity, illumination, cleanliness requirements, experimental work is controlled in the purified clean work shed area to improve the success rate of scientific research projects.

Advantages of the clean booth

1. The structure design of assembly, easy to install, greatly shorten the construction cycle, can be used alone, can also be used in combination and secondary disassembly and utilization.

2. The bottom can be configured with moving universal wheels, flexible and convenient for positioning and moving, suitable for building local or regional clean space.

3. Modular structure at the top, the number and size of FFU fan sets can be adjusted, and ultra-high efficiency filters can be selected to improve the cleanliness inside the clean room and increase the cleanliness level, with strong expandability and high reusable value.

4. Compared with ultra-clean bench, the available effective space inside is large, and compared with traditional clean room, the cost is low, construction is fast, simple and convenient.

Cleanroom laminar flow and non-laminar flow

In accordance with Class 10 standards, SNYLI can provide various models of cleanrooms.

For Class 10 and Class 100 cleanliness standards, 100% laminar flow essentially stops the degradation of cleanroom cleanliness caused by non-laminar flow.

At this level of cleanliness, the canopy must be completely covered by high efficiency or ultra high efficiency filters and the lighting must be teardrop type lighting so that all media from passing people or equipment is immediately removed from the clean area.

When the canopy is not completely covered, there is a circular blowing shower, in this case, the media present in the clean area is re-circulated and thus the cleanliness is temporarily damaged.

Hot Tags: laminar flow clean booth, China, suppliers, manufacturers, factory, wholesale, price, air filter for toxic gases control, air filter for poultry farming, air filter for space vehicles, air filter for ships, air filter for dust control, air filter for mining